Laser Displacement Sensor

Model: LK-G30
Warranty: 12 month
Delivery Time: 15-30days
Certificate: CE

Description

Specification

Model LK-G30
Reference distance 30 mm (Diffuse   reflection),23.5 mm (Specular reflection)
Measuring range ±5 mm (Diffuse   reflection),±4.5 mm (Specular reflection)
Light source Type Red semiconductor   laser
Wavelength 655nm (Visible   light), Class 3R laser product (JIS C6802)
Laser Class Class 3R (IEC   60825-1), Class IIIa (FDA CDRH Part 1040.10)
Output 4.8 mW
Spot diameter (at   reference distance) Approx. ø30 µm
Linearity ±0.05% of F.S.   (F.S.= ±5 mm)*1
Repeatability 0.05 µm (0.01 µm)*2*3
Sampling frequency 20/50/100/200/500/1,000   µs (Selectable from 6 levels)
LED display Near the centre of   the measurement: Green lights
Within the measurement area: Orange lights
Outside the measurement area: Orange flashing
Temperature   characteristics 0.01 % of F.S./°C   (F.S. = ±5 mm)
Environmental   resistance Enclosure rating IP67 (IEC60529)
Ambient light Incandescent lamp   or Fluorescent lamp: 10,000 lux max.
Ambient temperature 0 to +50 °C
Relative humidity 35 to 85 % RH (No   condensation)
Vibration   resistance 10 to 55 Hz, Double   amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material Aluminium die-cast
Weight Approx. 280 g   (including the cable)
*1 This value was taken when measuring   a KEYENCE standard target (ceramic) in standard mode.
*2 Consult your nearest KEYENCE representative for the Class   IIIa type with increased repeatability.
*3 These values were taken when measuring a KEYENCE standard   target (SUS) at a reference distance and with the number of averaging   measurements set to 4,096

 

 

The content is being updated
The content is being updated
Software Introduction

Sinowon Inquiry Information Table

To discount off if fill in the following inquiring information table, the question or inquiry will be replied in a short time.

Thanks a lot for the cooperation